Certifications 2

Page 3 of 6 2 Jan 2018
7. Handling and Storage
Storage : - Cells or Battery packs should be stored in a cool, dry and well
ventilated area. Cell life degradation is a function of time,
even if the battery is never used. As temperature increases,
the degradation rate of the cell increases, making it desirable
to keep inventory between 0℃ to 30℃ when practical. Cells
or battery packs that will be stored for extended periods
should undergo regular OCV checks and receive boost charges
on a regular schedule.
- Do not store the battery in place of the high temperature or
under direct sunlight or in front of a stove. Please also avoid
the places of high humidity. Be sure not to expose the battery
to condensation, water drop or not to store it under frozen
condition.
Airtight, watertight : - Cell or battery packs normally evolve very small amount of
Compartment hydrogen, which might cause harm to human body. In an
airtight compartment, proper ventilation is suggested.
Packaging : - When packing the batteries, do not allow battery terminals to
contact each other, or contact with other metals. Be sure to
pack batteries by providing partitions in the packaging box, or
in a separate plastic bag so that the single batteries are not
mixed together.
- Use strong material for packaging boxes so that they will not
be damaged by vibration, impact, dropping and stacking during
their transportation.
Short Circuit : - Care must be exercised in the handling and use of the cells or
battery packs to avoid external shorts. A current-limited
device such as a fuse, resistor, diode, or circuit breaker, may
be used in the discharge circuit to prevent short-circuit current.
Soldering or Welding : - Avoid solder or weld to cells directly, contact Intec Industries
Co. Ltd. for the proper handling procedures whenever in doubt.
Charging : - Incorrect chargers or reverse charging may result high
temperature and gas formation, which risk fire or cell rupture.
Do not leave the cell or battery packs charging over extend
period unless it is specifically designed to do so.
Intec
Intec Industries Co., Ltd.
Room 2703, Well Tech Centre,
9 Pat Tat Street, San Po Kong, Hong Kong
Tel: [phone] Fax: [phone]