User Manual

SCOPE

：

This specification applies to the current type Radial Leaded Inductor

for MCD-0912-SERIES

PRODUCT INDENTIFICATION

MCD - 0912 - 102 K

① ② ③ ④

① Product Code

② Dimensions Code

③ Inductance Code

④ Tolerance Code

(1) SHAPES AND DIMENSIONS

A: 11.0 Max. mm

B: 12.5 Max. mm

C: 15±2.0 mm

D: 5.0±0.5 mm

E: φ0.8±0.1 mm

F: 2.5 Max. mm

(2) ELECTRICAL SPECIFICATIONS

SEE TABLE 1

TEST INSTRUMENTS

L : HP 4284A PRECISION LCR METER (or equivalent)

RDC : CHROMA MODEL 16502 MILLIOHMMETER (or equivalent)

(3) CHARACTERISTICS

(3)-1 Ambient temperature ……......... ＋60℃ Max.

(3)-2 Operate temperature range ...... －40℃～＋125℃

(Including self temp. rise)

(3)-3 Storage temperature range ...... －40℃～＋125℃

MCD-0912-SERIES Page 1/4

MAG.LAYERS

PAGE 1
SCOPE： This specification applies to the current type Radial Leaded Inductor for MCD-0912-SERIES PRODUCT INDENTIFICATION MCD - 0912 - 102 K ① ② ③ ④ ① Product Code ② Dimensions Code ③ Inductance Code ④ Tolerance Code (1) SHAPES AND DIMENSIONS A: 11.0 Max. mm B: 12.5 Max. mm C: 15±2.0 mm D: 5.0±0.5 mm E: φ0.8±0.1 mm F: 2.5 Max.
PAGE 2
TABLE 1 MAGLAYERS Inductance Percent PT/NO. L(μH) Tolerance Frequency RDC(Ω)Max. IDC1(A) IDC2(A) MCD-0912-220□ 22 K,M 100kHz/0.25V 50m 4.50 3.50 MCD-0912-101□ 100 K,M 100kHz/0.25V 0.16 1.70 1.80 MCD-0912-121□ 120 K,M 100kHz/0.25V 0.20 1.50 1.70 MCD-0912-181□ 180 K,M 100kHz/0.25V 0.31 1.30 1.40 MCD-0912-221□ 220 K,M 100kHz/0.25V 0.34 1.10 1.15 MCD-0912-271□ 270 K,M 100kHz/0.25V 0.40 1.00 1.12 MCD-0912-301□ 300 K,M 100kHz/0.25V 0.46 0.96 1.
PAGE 3
(4) RELIABILITY TEST METHOD MECHANICAL NO. ITEMS CONDITIONS SPECIFICATIONS 1 Solderability test More than 90% of the Dipping: 245 ± 5 ℃, 3 ± 1 seconds termnial electrode should be covered with solder. 2 lead tensile 1.0 Kg MIN. The lead of product is pulled with a load of strength test 1.0kg mininum until lead breakdown. The tensile force shall be recorded. 3 Vibration test △L/L≦±7% The product is fixed ento the vibration with Visual:OK amplitude of 1.
PAGE 4
(5) PACKAGE SPECIFICATION (mm) M AG.