Owner manual

SCOPE

：

This specification applies to the current type Radial Leaded Inductor

for MCD-0808-SERIES

PRODUCT INDENTIFICATION

MCD- 0808 - 221 K

① ② ③ ④

① Product Code

② Dimensions Code

③ Inductance Code

④ Tolerance Code

(1) SHAPES AND DIMENSIONS

A : 10.0 Max. mm

B : 9.5 Max. mm

C : 15.0±2.0 mm

D : 5.0±0.5 mm

E : φ0.8±0.1 mm

F : 2.5 Max. mm

(2) ELECTRICAL SPECIFICATIONS

SEE TABLE 1

TEST INSTRUMENTS

L : HP 4284A PRECISION LCR METER (or equivalent)

RDC : CHROMA MODEL 16502 MILLIOHMMETER (or equivalent)

(3) CHARACTERISTICS

(3)-1 Ambient temperature ……......... ＋60℃ Max.

(3)-2 Operate temperature range ...... －40℃～＋125℃

(Including self temp. rise)

(3)-3 Storage temperature range ...... －40℃～＋125℃

MCD-0808-SERIES Page 1/4

MAG.LAYERS

PAGE 1
SCOPE： This specification applies to the current type Radial Leaded Inductor for MCD-0808-SERIES PRODUCT INDENTIFICATION MCD- 0808 - 221 K ① ② ③④ ① Product Code ② Dimensions Code ③ Inductance Code ④ Tolerance Code (1) SHAPES AND DIMENSIONS A : 10.0 Max. mm B : 9.5 Max. mm C : 15.0±2.0 mm D : 5.0±0.5 mm E : φ0.8±0.1 mm F : 2.5 Max.
PAGE 2
TABLE 1 MAGLAYERS Inductance Percent PT/NO. L(μH) Tolerance Frequency RDC(Ω)Max. IDC1(A) IDC2(A) MCD-0808-100□ 10 M 100kHz/0.25V 44 m 4.0 3.4 MCD-0808-150□ 15 M 100kHz/0.25V 56 m 3.5 3.0 MCD-0808-220□ 22 M 100kHz/0.25V 70 m 3.0 2.5 MCD-0808-330□ 33 M 100kHz/0.25V 0.10 2.7 2.1 MCD-0808-390□ 39 M 100kHz/0.25V 0.12 2.5 2.0 MCD-0808-470□ 47 M 100kHz/0.25V 0.14 2.3 1.7 MCD-0808-560□ 56 K,M 100kHz/0.25V 0.16 2.0 1.6 MCD-0808-680□ 68 K,M 100kHz/0.
PAGE 3
(4) RELIABILITY TEST METHOD MECHANICAL NO. ITEMS SPECIFICATIONS CONDITIONS 1 Solderability test More than 90% of the Dipping: 245 ± 5 ℃, 3 ± 1 seconds termnial electrode should be covered with solder. 2 lead tensile 1.0 Kg MIN. The lead of product is pulled with a load of strength test 1.0kg mininum until lead breakdown. The tensile force shall be recorded. 3 Vibration test △L/L≦±7% The product is fixed ento the vibration with Visual:OK amplitude of 1.
PAGE 4
(5) PACKAGE SPECIFICATION (mm) M AG.