SDS

Safety Data Sheet
Product identifier used on the label: MAG1 SNOW PLOW OIL 6/1QT
Stock Number: MG0SNOP6
Revision Date: 09-26-2016
Replaces:
Page 4 of 9
Individual protection measures, such as personal protective equipment:
Respiratory Protection:
Respiratory protection may be required to avoid overexposure when
handling this product. General or local exhaust ventilation is the
preferred means of protection. Use a respirator if general room
ventilation is not available or sufficient to eliminate symptoms. None
required where adequate ventilation is provided. If airborne
concentrations are above the applicable exposure limits, use
NIOSH/MSHA approved respiratory protection.
Respirator Type(s):
None required where adequate ventilation is provided. If airborne
concentrations are above the applicable exposure limits, use
NIOSH/MSHA approved respiratory protection.
Eye protection:
No special requirements under normal industrial use.
Skin protection:
Where use can result in skin contact, practice good personal hygiene and
wear impervious gloves. Wash hands and other exposed areas with mild
soap and water before eating, drinking, and when leaving work.
Gloves:
Polyvinyl chloride, Impervious rubber
General hygiene conditions:
No data available
9. Physical and chemical properties
Appearance (physical state, color etc.):
Physical state:
Liquid
Color:
Blue
Odor:
Mild
Odor Threshold:
Not determined
pH:
Not determined
Melting point/freezing point:
Melting Point:
No data available
Freezing point:
No data available
Initial boiling point and boiling range
(°C):
Not determined
Flash Point (°C):
215
Flash Point Method:
COC
Evaporation Rate:
No data available
Flammability (solid, gas):
No data available