SDS

Safety Data Sheet
Product identifier used on the label: MAG1 SNOW PLOW OIL 6/1QT
Stock Number: MG0SNOP6
Revision Date: 09-26-2016
Replaces:
Page 3 of 9
chemical:
Hazardous combustion products:
Carbon dioxide, Carbon monoxide
Special protective equipment and
precautions for fire-fighters:
No data available
6. Accidental release measures
Personal precautions, protective
equipment and emergency procedures:
No health affects expected from the clean up of this material if contact
can be avoided. Follow personal protective equipment recommendations
found in Section 8 of this SDS.
Methods and materials for containment
and cleaning up:
Prevent the spread of any spill to minimize harm to human health and
the environment if safe to do so. Wear complete and proper personal
protective equipment following the recommendation of Section 8 at a
minimum. Dike with suitable absorbent material like granulated clay.
Dispose of according to Federal, State, Local, or Provincial regulations.
Used fluid should be disposed of at a recycling center.
7. Handling and storage
Precautions for safe handling:
Mildly irritating material. Avoid unnecessary exposure. No data available
Conditions for safe storage, including
any incompatibilities:
Safe storage conditions:
Store locked up.
Materials to Avoid/Chemical
Incompatibility:
Strong oxidizing agents
8. Exposure controls/personal protection
OSHA permissible exposure limit (PEL), American Conference of Governmental Industrial Hygienists (ACGIH)
Threshold Limit Value (TLV), and any other exposure limit used or recommended by the chemical manufacturer,
importer, or employer preparing the safety data sheet, where available:
Chemical component
OSHA PEL
ACGIH TLV
ACGIH STEL
IDLH
Lubricating oils
(petroleum), C20-50,
hydrotreated neutral oil-
based
5 mg/m3
5 mg/m3
10 mg/m3
No data available
Appropriate engineering controls:
Use local exhaust ventilation or other engineering controls to minimize
exposures and maintain operator comfort.