SDS

Safety Data Sheet
Product identifier used on the label: MAG1 SNOW PLOW OIL 6/1QT
Stock Number: MG0SNOP6
Revision Date: 09-26-2016
Replaces:
Page 2 of 9
3. Composition/information on ingredients
Chemical Name
Common name and
synonyms
CAS #
%
Lubricating oils (petroleum),
C20-50, hydrotreated neutral oil-
based
No data available
72623-87-1
100
One or more hazardous ingredient(s) is claimed as a trade secret under the OSHA Hazard Communication
Standard. The hazards of this (these) ingredient(s) are given on this SDS.
4. First-aid measures
Description of necessary measures, subdivided according to the different routes of exposure, i.e., inhalation, skin
and eye contact, and ingestion:
Inhalation:
Remove to fresh air. If breathing is difficult, have a trained individual
administer oxygen.
Eye Contact:
None expected to be needed, however, use an eye wash to remove a
chemical from your eye regardless of the level of hazard.
Skin Contact:
Wash with soap and water. Get medical attention if irritation develops or
persists.
Ingestion:
Most important symptoms/effects,
acute and delayed:
May be fatal if swallowed and enters airways
Indication of immediate medical
attention and special treatment
needed, if necessary:
No additional first aid information available.
5. Fire-fighting measures
Suitable (and unsuitable) extinguishing media:
Suitable extinguishing media:
Use alcohol resistant foam, carbon dioxide, or dry chemical when fighting
fires. Water or foam may cause frothing if liquid is burning but it still may
be a useful extinguishing agent if carefully applied to the surface of the
fire. Do not direct a stream of water into the hot burning liquid.
Unsuitable extinguishing media:
No data available
Specific hazards arising from the
No data available