User manual

Confidential, the whole present document is the sole property of Maestro Wireless Solution Ltd.
6
1. INTRODUCTION
Maestro Smart Pack (MSP) package is a software solution for Maestro 100 2G modem. New functions added to increase
application range of various industrial and automated applications:
- Automatic and self-recovery TCP/UDP socket connection
- AT command driven TCP/UDP socket connection
- Ping service
- Dynamic DNS (* note 1)
- Remote AT command through SMS and TCP Terminal (* note 1)
- I/O triggered AT command execution
- Call screening (reject call made by unauthorized phone number)
- Modem status check and monitoring
- Socket data sending (Raw TCP data)
- Email sending (SMTP)
- “Command String” programming scripts
- Remote program updating
- AI triggered AT command
Users can configure and use the above features by AT commands.
Note 1: Special GPRS service from network recommended. See Chapter 8 and 9 for details
2. INSTALLATION
2.1. Checking the SmartPack program
SmartPack for M100 2G have been installed and activated in factoryFirst check the Maestro 100 2G firmware before
installation. Enter MSP version command AT+VAFV to verify :
Command
Expected response
AT+VAFV
SMARTPACK_M1002G_097eRC3_SL6087_R746_250413
OK
If the above command returns ERROR, please try to enter command AT+WOPEN=1 and retry.
2.2. Erasing the Smart Pack
If you need to erase the Smart Pack on HyperTerminal enter the following commands step by steps:
Command entered
Expected response
AT+WOPEN=0
(modem may reset)
AT+WOPEN=3
OK
AT+WOPEN=4
(modem may reset)
AT&F
OK