User manual

Confidential, the whole present document is the sole property of Maestro Wireless Solution Ltd.
73
Note:

Please read M100 2G manual carefully before setup.
 The Service cannot detect AI value change period less than 1s. If the AI value change is less than 1 second this
feature will not be able to detect accurately
20.7.3 Reading Analogue Input Service status
See Chapter 21 for details.
20.8 Socket Communication Service
This service is used to send out a message Email to one saved TCP host, with saved message content plus variable
message. Please read Chapter 11 for entering host address and parameters, Up to 10 set of groups (service type SC, id
1 to 10) can be set with different combinations of "elements" : host , message content.
20.8.1 Socket Communication Service Command String Syntax and explanation
1
st
field
Service
type
2
nd
field
Service id
3
rd
field
Operation
type
4
th
field
Operation
argument
Explanation
SC
(1 to 10)
TO
(1-10)
Id of host address (see Chapter
11.2a)
BD
(0-3)
Id of email body (see Chapter
10.2b)
0 : no body
SN
(additional
content)
Send out the message with above
setting plus additional content
%CTn
%IP ,
%TMn,
%AI
“%” to indicate “variable” options in
additional content
Example: Setting up SC set #1 with elements: host #1, content #2:
SC 1 TO 1 SC 1 BD 1
Example: Sending socket communication message SC set#1 with additional content "HELLO_WORLD":
SC 1 SN HELLO_WORLD
Example: Setting up SC set #2 with message "0", and send out immediately:
SC 2 BD 0 SC 2 SN 0
AI value
Time = T
T=TH

Trigger to execute
Command String if TP=1 or
TP=3
Time = T
T=TH

Trigger to execute
Command String if TP=2 or
TP=3
Start to count threshold
time when crossing H/L
Limit