User manual

Confidential, the whole present document is the sole property of Maestro Wireless Solution Ltd.
28
7.2. AT command for configuring Dynamic DNS
7.2.1. AT+IPDDNSSERV command
Command Syntax
AT+IPDDNSSERV= <serv_url>,<serv_port>
Response syntax:
+IPDDNSSERV: <serv_url>,<serv_port>
OK
Command
Possible responses:
AT+IPDDNSSERV=”members.dyndns.org”,8
0
OK
Note : enter DDNS service provider’s update server
information
AT+ IPDDNSSERV?
+IPDDNSSERV: ”members.dyndns.org”,80
OK
Note display current status
AT+ IPDDNSSERV =?
+ IPDDNSSERV: (64),(0-65535)
OK
Note : possible argument
Defined Values:
<serv_url>
URL of the update server. For example it is “members.dyndns.org” for www.dyndns.com
. Check with your DDNS service
provider for correct name.
<serv_port>
Port number of the update server. For example it is 80 or 8080 for www.dyndns.com
. Check with your DDNS service
provider for correct port number.
List of parameters of verified DDNS service providers:
Provider
<serv_url>
<serv_port>
www.dyndns.com
members.dyndns.org
80
www.no-ip.com
dynupdate.no-ip.com
80
7.2.2. AT+IPDDNSACCT command
Command Syntax
AT+IPDDNSACCT=<hostname>,<login>,<psswd>
Response syntax:
OK
Command
Possible responses:
AT+IPDDNSACCT=”12345678.dyndns.org”, ”
maestro”, ”maestro”
OK
Note : enter DDNS account and host name info
AT+ IPDDNSACCT?
+IPDDNSACCT: ”12345678.dyndns.org”, ”maestro”, ”maestro
”
OK
Note display current status
AT+ IPDDNSACCT=?
+ IPDDNSACCT: (64),(32),(32)
OK
Note : possible argument