Specifications

Figure 4.2.1: Start page - Maestro Configuration Software
5. Auto-detect serial configuration: will detect your modem serial configuration automatically, though it may
take some time.
6. Menu tab page: once connected menu will show ready for use and could do configuration of all modem
features.
7. Quick connect/disconnect button.
8. AT command sent status message: will show the current AT command sent to the modem for a quick debug.
9. Quick signal strength overview which can be deactivated.
Figure 4.2.2: Status page - Maestro Configuration Software
Once connected, the interface will switch to the “Modem Status” page, see Figure 4.2.2, displays the reception signal
strength (RSSI, refreshed every five seconds), your SIM card network name, as well as the revision number for the
embedded application and firmware.
16 Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
[e-mail]