User manual

Confidential, the whole present document is the sole property of Maestro Wireless
Solutions Limited.
Quick Start Guide
The Maestro 3GIRrouter is a self-contained router solution, so no other devices such as
power supplies or modems are required. It contains a built-in power supply and a built-in
GPRS/EDGE/3G engine capable of 216kb/s downlink speed.
To immediately start using your router, follow these simple steps:
1. Insert your SIM card in the SIM Card socket if one is not already installed.
2. Connect the router in to a mains socket.
3. Connect the PC to the router using a crossover Ethernet cable*
4. Switch the router on and wait until the status LED is no longer red. Orange indicates
GPRS, Green indicates EDGE and blue indicates UMTS.
5. Switch the PC on.
6. The router will assign an IP address to the PC.
7. Start browsing the Internet.
* If the Maestro 3GIRis connected to a switch, then a normal Ethernet cable will also work.