User manual

Confidential, the whole present document is the sole property of Maestro Wireless
Solutions Limited.
After you entered the values hit the Submit button. The first halve of the IP-IP tunnel
configuration is now completed.
4.6.2.2 Site B Configuration
Open your browser and connect to the web interface of the Site B router. On the Site B
router you will enter the network information of the Site A router. Enter the following values
on the IP-IP tunnel configuration page:
Endpoint: 10.123.0.80
Network: 192.168.100.0
Netmask: 255.255.255.0
After you entered the values hit the Submit button. The second halve of the IP-IP tunnel
configuration is now complete. Your tunnel is ready to use.
4.6.3 Further reading
The use and configuration of IP-IP tunnels is well documented on the Internet. Google is
your friend here! Some links:
http://lartc.org/howto/lartc.tunnel.html
http://www.shorewall.net/IPIP.htm
http://www.linuxfoundation.org/en/Net:Tunneling
Make sure you understand the fundamentals of IP routing and IP tunnelling and test your
scenario before you take your equipment to site.
http://www.ralphb.net/IPSubnet/index.html
http://www.w3schools.com/tcpip/default.asp