User manual

Confidential, the whole present document is the sole property of Maestro Wireless
Solutions Limited.
Example
Let's say you have 3 networks: Internal networks A and B, and intermediate network C (or
let's say, Private APN).
So, for Site A network, we have:
network 192.168.100.0 (A2 in the below diagram)
netmask 255.255.255.0
router 192.168.100.1
This router has address 10.123.0.80 on network C. This is A1 in the below diagram.
And, for Site B network, we have:
network 192.168.200.0 (B2 in the below diagram)
netmask 255.255.255.0
router 192.168.200.1
This router has address 10.123.0.97 on network C. This is B1 in the below diagram.
4.6.2.1 Site A Configuration
Open your browser and connect to the web interface of the Site A router. On the Site A
router you will enter the network information of the Site B router. Enter the following values
on the IP-IP tunnel configuration page:
Endpoint: 10.123.0.97
Network: 192.168.200.0
Netmask: 255.255.255.0