Instruction manual

13
Defrost indicator
flashes
Temperature above 40°C
If the temperature is not high then call Meaco as
you have a NTC fault.
light flashes
Mode button is disabled, unit runs in Laundry
mode only
You should be able to cure this fault by
unplugging the unit for 5 minutes and then
restarting the dehumidifier. If the fault persists
then call Meaco as you might have a faulty
temperature and humidity sensor.
light flashes
and bleeps
All buttons disabled.
You should be able to cure this fault by
unplugging the unit for 5 minutes and then
restarting the dehumidifier. If the fault persists
then call Meaco as you might have a faulty
temperature and humidity sensor or NTC.