User manual

MADRIX PLEXUS User Manual / Handbuch62

Network Settings

Please make sure that the network settings of your operating system and the settings of

your PLEXUS device are correct!

To configure the IP address, subnet mask, and standard gateway of your device, go to the

PLEXUS menu 'Settings' 'Network'. Or use the PLEXUS Configuration dialog.

In Windows, please navigate to the corresponding item to change the network settings of your

operating system.

In general, these settings are recommended:

Please set up your network card using the following Art-Net address area:

2.0.0.1 ... 2.255.255.254 or

10.0.0.1 ... 10.255.255.254

Artistic Licence, the creators of Art-Net, recommends to primarily use the first address range. The

second is regarded to be an alternative.

Please use the following Subnet mask:

255.0.0.0

It is recommended to use this address area.