User manual

MADRIX PLEXUS User Manual (English) 41

Activate 'Full Frames' if PLEXUS devices should always send full frames,

instead of optimized frames on a particular universe. Sending full frames means that always the full

512 DMX channels of a DMX universe will be sent with every frame (even when you are using less

than 512 channels per universe). Otherwise, MADRIX will send the number of DMX channels that is

configured.

Always press 'Apply' to activate any changes you made.

The 'Highlight Device' button activates/deactivates the highlight mode

for the selected device and universe.

Select one ore more interfaces and press the button. The corresponding fixtures connected to the

selected interface(s) will completely light up white for a better identification. This makes it easier

to see them on stage. It considerably speeds up the procedure of programming the selected

DMX512/Art-Net interfaces.

In addition, the display of selected PLEXUS devices will flash regularly.

Open the "DMX Watcher" to monitor your DMX

output or input. "Watch Universe" will appear when you have selected a list entry. The DMX

Watcher will open with the particular DMX Universe already entered.

Press 'OK' when you are finished setting up your devices.