User manual

MADRIX PLEXUS User Manual (English) 11

Start may include some abbreviations: SR for Sunrise or SS for Sunset.

You can configure Timers in your PLEXUS Configuration using MADRIX.

For more information, see Step 6) Creating A PLEXUS Configuration.

Ports

Navigate to the menu 'Stand-Alone' 'Ports'.

All configured Ports of your current PLEXUS Configuration are listed in

this menu.

Select a specific Port with and .

You can check the 'Type', 'Action', Inversion, 'Threshold', and 'Value' of

each Port.

You can configure Ports in your PLEXUS Configuration using MADRIX. For

more information, see Step 6) Creating A PLEXUS Configuration.

Intensity/Speed

Navigate to the menu 'Stand-Alone' 'Intensity/Speed'.

You may instantly change the Intensity (brightness) or Speed of the

device in this menu.

Press to reduce the Intensity. Press to increase Intensity.

Minimum Intensity is 0%. Maximum Intensity is 100%. The default value

is 100%.

Press to decrease Speed. Press to increase Speed.

Minimum Speed is 1%. Maximum Speed is 1000%. The default value is

100%.

Additionally, you can change the settings for the 8 Intensity Groups.

Each Intensity Group is represented by a rectangle. At full intensity, the

rectangle will be completely white. At zero intensity, the rectangle will

be completely black.

For more information about Intensity Groups, see Remote Control.

You may change the settings in this menu, on the device (How To Edit

Values).