User manual

MADRIX PLEXUS User Manual (English) 109
© 2013 inoage GmbH
'SD Card'
cannot be edited. The 'used space'/'total available space' of your SD card is
shown. The values are displayed in GB.
'Remote Control'
defines the source for remote control. You can choose to receive remote
commands via USB, via Art-Net, or to turn remote control off (Disabled).
On the device, use the menu 'Remote Control' 'Remote Options'.
More information is given in the chapter Remote Control.
'Remote
Universe / Port'
defines for Art-Net which universe or for DMX which XLR port is used to
receive the remote commands.
On the device, use the menu 'Remote Control' 'Remote Options'.
More information is given in the chapter Remote Control.
'Remote Start
Channel'
defines a DMX start channel, which specifies the range of DMX channels
used for the set of remote functions. 20 DMX channels are used by the
remote functions. The default value is 1.
On the device, use the menu 'Remote Control' 'Remote Options'.
More information is given in the chapter Remote Control.
'Remote Thru'
defines if DMX-Thru is enabled (DMX -> Art-Net), when Remote Control is
activated over DMX. Incoming DMX data would then additionally be sent
through to Art-Net.
On the device, use the menu 'Remote Control' 'Remote Options'.
More information is given in the chapter Remote Control.
'Timers'
defines if Timers are activated or deactivated for the device.
On the device, use the menu 'Settings' 'Device'.
'Ext. Port'
defines if the Extension Port and its Ports are activated or deactivated for
the device.
On the device, use the menu 'Settings' 'Device'.