Owner`s manual

Add Item

Delete Item

Save Program

Delete Program

Turn Program On

(or turn Program Off, depending on which mode you are in)

Pressing program repeatedly cycles you through the listed options. The

currently selected option is highlighted on the screen, and appears in the

front panel display. For more information on programming your PMDT,

see Programming the PMDT on page 46.

6 NUMERIC KEYPAD

Use these numbers in conjunction with disc menus (when the authoring

of the disc calls for numeric input), and in conjunction with the jump

button to directly access the part of the disc you want.

7 TITLE, HELP, JUMP

title: Use the title button to access a title menu of a DVD if one exists, at

any time.

help: Use the help button to access the online help system built into the

PMDT. Press help, followed by the button that you would like to have

help on. Note that this feature places information on your display device,

so it will have to be on to see the help text.

jump: Use the jump button to “jump” directly to a different spot on the

disc. Pressing the button creates a popup window that looks something

like the following:

Jump to: 1 5 00:23 1

The example above indicates that you pressed the jump button at 23

seconds into Title 1, Chapter 5. By default, the current title is selected.

If you want to jump to a different title, just enter the number and press

play or enter.

Pressing jump again provides access to any chapter within the title dis-

played in the previous field; the third press of jump allows you to access

a particular time within that chapter. Pressing jump a fourth time cycles

you back to selecting the title you want. When done, press play or enter

to jump to your selected location.

A word of caution; By jumping into certain titles on a DVD, such as an

INTRO or a splash screen title, subsequent disc playback behavior may

be erratic. This will happen because the PMDT may not have received

the required commands from the loaded disc needed for proper

navigation.