Owner`s manual

17
L
R
R
A1
A2
LR
RR
C
S
L
R
R
PR O C E E D
audio video preamplifier made in u.s.a. by
b
R L
L
1 2345678 1 23
45
67
C L R L
digital
output
control
control ports
PHASTLink™ compatible
RS-
232
ir
input
1 2
triggers
outputs
12
3
12
3
21
3
21
3
21
3
PUSH
21
3
21
3
12
3
R
L
1
6
2
7
3
5 8
4
L
R
~AC mains
video
inputs
main
video
outputs
remote/record
video outputs
digital inputs
recordremoteanalog outputs
analog inputs
Y/G Pb/B Pr/R Csync Y/G Pb/B Pr/R Csync Y/G Pb/B Pr/R Y/G Pb/B Pr/R composite s video Y/G Pb/B Pr/R Csync to controller to AVP2
5V DV
1A reg.
WAR NIN G !
Use only with
MADRIGAL
supplied
power supply.
Use only with
MADRIGAL
supplied
power supply.
input 1 input 2 input 3 input 4
input 5 input 6
output
RS-232 control
to external
RS-232
control
system
(optional)
composite & S-video sources
component or RGsB sources
to television
YPbPr or RGsB
SDTV/HDTV
RS-232 communications
selected composite or S-video source➔ ➔
to
composite
video
monitor
(optional)
Configuration 1:
AVP2 & CVP2
This configuration adds component video switching to the AVP2, and can
transcode all SDTV video formats, either for direct connection to a television
or in preparation for further video processing. HDTV signals are passed
through to the output of the CVP2.
In this way, one can have a single connection to the display device, and enjoy
one-touch selection of any A/V source on the AVP2 (without having to also
select different video inputs on the television).
For the purposes of this explanation, we will assume that your AVP2 is set up
according to its owner’s manual, and that its operating software is up to date.
Important! At the beginning of this setup procedure, make sure that the
main video output of the AVP2 is connected directly to your
display. You must have access to the AVP2 on-screen menus
during the initial configuration of the CVP2.
If in doubt about any of these conditions being met, please consult your local
Proceed dealer.