Specifications

63
MAIN MENU
OPERATE
SETUP
CUSTOM
ABOUT...
CUSTOM
TEACH REMOTE
TRIG 1 SOURCE: STANDBY
TRIG 1 TYPE: PULSE
TRIG 2 SOURCE: STANDBY
TRIG 2 TYPE: LEVEL
REAR IR IN: REMOTE
TEACH REMOTE
PANEL BUTTONS
REMOTE ONLY
DIRECT ACCESS
SPECIAL
PANEL BUTTONS
PRESS FRONT PANEL KEY
DIRECT ACCESS
SURROUND MODES
PATH
MORE INPUTS
MISC CONTROL
SPECIAL
CONTROL TRIGGER 1 ON
CONTROL TRIGGER 1 OFF
CONTROL TRIGGER 2 ON
CONTROL TRIGGER 2 OFF
SUB/CROSSOVER
PRESS MUTE TO TEACH
SURROUND MODES
PRO LOGIC
PRO LOGIC + THX
STEREO SURROUND
MONO SURROUND
2-CH/SURROUND OFF
MONO
PRESS MUTE TO TEACH
PATH
MAIN
REMOTE
BOTH
PRESS MUTE TO TEACH
MORE INPUTS
MORE 1
MORE 2
MORE 3
MORE 4
MORE 5
MORE 6
↓ MORE 7
PRESS MUTE TO TEACH
MISC CONTROL
OPERATE
STANDBY
MUTE ON
MUTE OFF
LATE NIGHT ON
LATE NIGHT OFF
↓ THX ON
PRESS MUTE TO TEACH
MORE 8
THX OFF
FAVORITE VOLUMES
FAVORITE VOLUMES
VOLUME A: 20.0
VOLUME B: 25.0
VOLUME C: 30.0
VOLUME D: 35.0
VOLUME E: 40.0
REMOTE ONLY
SPECIAL
NEXT VIDEO
PREV VIDEO
NEXT AUDIO
PREV AUDIO
VOLUME UP
↓ VOLUME DOWN
PRESS MUTE TO TEACH
MENU
ENTER
DISPLAY
STATUS
LATE NIGHT
THX TOGGLE
DUAL DRIVE TOGGLE
The Custom Menu
If the setup menu is where you go in order to perform routine setups, the
custom menu is the destination for unusual situations and needs. In many cases,
these needs are the result of the requirements of a custom installation, one in
which home automation equipment may figure heavily. For example, if you want
to control your AVP from a centralized controller such as those from Audioaccess,
AMX, AudioEase, Crestron, or PHAST, this is the place to come. In this menu you
will find the specific functions you need for systems like these.
If you are the owner of the AVP (rather than a professional installer), this section
is likely to be of little interest. It’s the one section you should feel free to skip