Owner`s manual

port and (basic) preamp functions. Pressing and holding the select but-

ton will toggle between switching digital inputs vs. switching analog in-

puts; simply clicking the button moves you to the next input in the

bank of inputs currently being controlled.

Note that for Select Linking to work, you must have named the associ-

ated digital processor properly to match the appropriate name from the

Name List. Thus a Nº30.6 should be named No30.6; a Nº360S should

be named No360S, and so forth.

play link Placing your Mark Levinson transport in play will activate both the

corresponding Mark Levinson digital processor and the Nº32 if either

or both is in standby. In addition, the appropriate inputs will be se-

lected on the digital processor and on the Nº32 (specifically, the input

which has an name of a Mark Levinson source component such as

Nº30.6, No360S or No39).

Similarly, activating a Linked Mark Levinson digital processor will se-

lect the appropriate input on the Nº32 (should you be using the pro-

cessor with an unlinked DAT machine, for example).

record link Placing the Nº32 into standby while your Mark Levinson digital audio

processor is in record mode and a Mark Levinson transport is in Record

Link mode will cause a warning to be displayed on the digital compo-

nent. Both digital components will be prevented from going into

standby without explicit confirmation at those components that this is

what you desire. In this way, inadvertent interruption of a digital re-

cording in process can be avoided.

After changing any of the Linked functions, cycle power on the Nº32 to

ensure that they take effect.

HDCD™ link Linked Mark Levinson digital processors will implement the required

six decibel change in volume for HDCD recordings in the Nº32 auto-

matically if they are both properly Linked and if their name has been

set to match the appropriate name from the Name List. Thus a Nº30.6

should be named No30.6; a Nº360S should be named No360S, and so

forth.

In fact, as long as the first four characters are correct, even custom

names will be recognized and operate properly. For example, you could

refer to a No30xyz and it would still be recognized as a member of the

Nº30 family. (Though why you would want to do so remains a mystery.)