Owner`s manual

26
right channel
DC power
left channel
DC power
earthac mainsNº25/S
DC power
communications ports
master slave in amplifier
RS-232
Nº32 Reference Controller
s/n _______
DC power DC power
control ports
PHASTLink™ compatible
main outputs
inputs
1 2 3
4 5 6 7 8
record outputs
2 31 2 13
8 7 6 5 4
3 2 1
inputs
record outputs main outputs
Please see bottom panel for
additional information
MARK LEVINSON REFERENCE
PREAMPLIFIER Nº32
RIGHT CHANNEL LEFT CHANNEL
s/n
made in U.S.A.
phono
ground
refer to owner’s manual prior to opening the unit for any reason
right phono
21
left phono
12
trig intrig outir input
1 2
4
3 23 1
5 6 7 8 8 7 6 59 10
Rear Panel, Nº32 Preamplifier
Note: All left-channel inputs and outputs are on the left of the rear
panel as seen from the front, and all right-channel inputs and outputs
are on the right of the rear panel as seen from the front. This design
minimizes any possible confusion when changing connections once the
unit is installed, while also maximizing channel separation in this dual
monaural preamplifier.
1 DC Power Inputs (one per channel)
These keyed multi-pin connectors accept the supplied DC power
cables which should be connected between the Nº32 Controller
and the Nº32 Preamplifier. There is one cable per channel.
2 Balanced Inputs 1–3
Accepts right-channel and left-channel balanced signals from
source equipment with balanced outputs.
The pin assignments of these XLR-type female input connectors
are: