Owner`s manual

21
right channel
DC power
left channel
DC power
earthac mainsNº25/S
DC power
communications ports
master slave in amplifier
RS-232
Nº32 Reference Controller
s/n _______
DC power DC power
control ports
PHASTLink™ compatible
main outputs
inputs
1 2 3
4 5 6 7 8
record outputs
2 31 2 13
8 7 6 5 4
3 2 1
inputs
record outputs main outputs
Please see bottom panel for
additional information
MARK LEVINSON REFERENCE
PREAMPLIFIER Nº32
RIGHT CHANNEL LEFT CHANNEL
s/n
made in U.S.A.
phono
ground
refer to owner’s manual prior to opening the unit for any reason
right phono
21
left phono
12
trig intrig outir input
1 2 4 7
10
3 8 9 15 6
Rear Panel, Nº32 Controller
1 DC power output for left and right channels
The Nº32 Controller acts as both the control center for your two-
piece preamplifier and as the power supply for the preamplifier
proper. This architecture ensures that only pure DC power and
the audio signals themselves enter the chassis responsible for
preamplification.
Since the Nº32 Reference Preamplifier is a dual mono design, each
channel has its own power supply. Two separate DC power cables
are used to conduct the power from the Controller to the Pream-
plifier to avoid any possibility of interaction between channels.
Connect the supplied DC power cables between the Controller
and the Preamplifier. These cables are not directional.
2 Control Ports (PHAST™ compatible)
These ports are reserved for future use as PHASTLink™ commu-
nications ports. For more information, please contact your dealer
and ask about PHAST™ home automation systems.