Owner`s manual

9 Setup Button

Pressing the setup button places the Nº32 into setup mode, and

lights the LED indicator immediately above the setup button.

While in setup mode, the display is used to show a series of menu

choices that allow you to customize the Nº32 rather extensively, to

better suit your system’s needs and personal preferences. For more

information on this customization, please see “Customizing Your

Nº32.”

10 Enter Button

Used in conjunction with the setup button, the enter button

allows you to save changes made to the Nº32 while in setup mode.

For more information on this customization, please see “Custom-

izing Your Nº32.”

11 Balance Button

Pressing the balance button allows you to adjust the relative vol-

umes of the left and right channels. While in balance mode, the dis-

play changes to show you the current relative balance of the left and

right channels, displaying the magnitude of the offset in decibels. If

you leave the balance mode with the balance “off-center,” the LED re-

mains lit to remind you that the balance is not “even.”

12 Mute Button

Pressing the mute button will reduce the main output level of the

preamplifier by a user-modifiable amount, ranging from 1 to 60

decibels. Pressing the mute button a second time without adjust-

ing the volume will return it to its previous setting.

If you adjust the volume with either the volume knob or the re-

mote control

while mute is engaged, the preamplifier will adjust

its volume from the muted volume and disengage the mute func-

tion. (This is to prevent an unpleasant surprise when, having in-

creased the volume while muted, someone unmutes the system.)

The factory default setting of the mute circuit is -20 dB. (See “Cus-

tomizing Your Nº32” for information on changing the factory de-

fault setting.)