Owner`s manual

15
The Left and Right Main Out jacks on the rear panel of the Nº32
Preamplifier should be connected to the corresponding inputs of
your power amplifier. If your power amplifier has balanced inputs
and you have appropriate high-quality cables (with XLR plugs at
both ends), we recommend using the Balanced Main Outs. Other-
wise, use the (single-ended) Main Outs from the preamplifier to
your power amplifier. Once again, high quality interconnecting
cables such as Madrigal CZ Gel will yield superior results, and are
strongly recommended.
5 Turn on your source component; turn on your power ampli-
fier; select the appropriate input using the Select knob;
slowly raise the volume on the Nº32 to a comfortable level
Congratulations! You should now be able to enjoy your favorite
music while reading the rest of this manual.