Specifications

67
remote only menu REMOTE ONLY
MENU
ENTER
DISPLAY
ON SCREEN
THX
STATUS
LATE NIGHT
DUAL DRIVE TOGGLE
Press the appropriate button on the remote control (while in learning
mode), and then use the front panel master and volume +/– buttons to
select and “fire” the appropriate IR command from the main display of
the PAV into the remote control. Repeat as necessary.
5 TO LEARN COMMANDS THAT GIVE DIRECT ACCESS TO SURROUND
MODES, SIGNAL PATHS, AND POSITIVE CONTROL OVER TOGGLE
FUNCTIONS, SELECT “DIRECT ACCESS” ON THE TEACH REMOTE
MENU
You may also teach special commands to the PAV remote control which
allow direct access to the various surround modes, signal path and con-
trol options. These may be assigned to any available button on the PAV
remote control.
For example, you may find that you use the THX cinema, pro logic,
stereo surround and surround off modes most frequently. You could as-
sign a button to each of these and never have to cycle through the other
options again. Definite “on” and “off” commands for standby and mute
(rather than toggles) offer improved control over the PAV when operated
from a remote zone, or when controlling the system via a macro.
The Surround, Path and Misc Control menus under the Direct Access
menus are as follows:
surround, path and
misc control menus
SURROUND PATH MISC CONTROL
PRO MAIN OPERATE
STEREO S REMOTE STANDBY
MONO S BOTH MUTE ON
SUR OFF RECORD MUTE OFF
MONO DIRECT VOLUME
Press the appropriate button on the remote control (while in learning
mode), and then use the front panel master and volume +/– buttons to
select and “fire” the appropriate IR command from the main display of
the PAV into the remote control. Repeat as necessary.
MENU
ENTER
DISPLAY
ON SCREEN
THX
STATUS
LATE NIGHT
DUAL DRIVE
TOGGLE
PANEL
BUTTONS
REMOTE
ONLY
DIRECT
ACCESS
SPECIAL
TEACH
REMOTE