Owner`s manual

Operating Voltage

The Nº360 Digital Audio Processor is set at the factory (internally) for

100V, 120V, 220V, 230V or 240V AC mains operation @ 50 or 60Hz.

(230V/50Hz only in European Union countries, in compliance with CE

regulations.) This voltage setting cannot be changed by the user. Make

sure that the label on the bottom panel of the Nº360 (adjacent to the

AC cord) indicates the correct AC operating voltage for your location.

If the voltage indicated on your Nº360 is incorrect, or if you wish to

change the AC operating voltage of your Nº360 as the result of moving

to a different country than the one in which you purchased your digital

audio processor, see your Mark Levinson dealer.

The Nº360 can be powered by a normal 15-ampere AC mains line. If

other devices are also powered from the same AC line, their additional

power consumption should be taken into account.

For optimal sonic performance and longevity, the Nº360 is designed to

remain powered at all times (the

standby switch merely mutes the

processor’s outputs and turns off the display). There is an initial break-

in period of approximately 300 hours before the Nº360 achieves opti-

mum performance.