Owner`s manual

Setup and Installation

Caution! For your protection, review “Important Safety

Instructions” before you install your Nº360.

Nº360 Input Names The Nº360 allows you to assign any of a wide variety of names to each

of the eight digital inputs, shown below:

NOT USED (any unused input)

CD Compact Disc

DVD Digital Video (or “Versatile”) Disc

LD Laser Disc

DAT Digital Audio Tape

DCC Digital Compact Cassette

MD Mini Disc

CDR Compact Disc, Recordable

CDI Compact Disc, Interactive

DBS Direct Broadcast Satellite

DSS Digital Satellite System (“DirecTV” or

“USSB”)

AUX Auxiliary (other digital sources)

DCR Digital Cable Radio

The name you assign to an input is shown on the display when a source

is selected (see “Display, Nº360”). Before operating your Nº360, you’ll

want to customize it to match the digital sources in your system.

The Nº360 digital audio processor is shipped with inputs 1 and 5

named CD, since you will probably want to hook up your new compo-

nent and start using it right away. CD1 is an AES/EBU (XLR) digital

input, and CD5 is a S/PDIF (RCA) digital input, and both are ready for

use as soon as the Nº360 is powered up and connected to the rest of the

system. (See “Making Digital Connections” and “Making Analog Con-

nections” below.) Other inputs are named NOT USED and must be re-

named before they may be used.

Important! Any input named NOT USED cannot be used to

convert digital signals to analog until its name has

been changed.