Owner`s manual

26
10 electrical digital output
This output provides digital audio signal (DAS) via cables equipped
with XLR-type connectors to a digital processor, digital audio tape
recorder, preamplifier, integrated amplifier, or receiver equipped
with XLR-type digital inputs.
Male XLR output
connector (digital)
12
3
Pin 1: Chassis ground
Pin 2: non-inverting DAS
Pin 3: inverting DAS
Connector ground lug: chassis ground
This digital output is enabled or disabled by the mode button, and
when enabled makes a copy of the DAS of the currently selected
input available to other components. It employs the 110Ω aes/ebu
transmission standard.
11 PHASTLink
®
Control ports
In addition to the Mark Levinson Linking system described above,
the Nº360 can, as an extra-cost option, support the PHASTLink
®
communications system. This system is designed to facilitate com-
plete systems integration with PHAST
®
controllers. For more in-
formation on PHAST
®
(a division of AMX
®
), please refer to the
internet at http://www.phast.com.
12 RS-232 Port
The Nº360 also includes an RS-232 port, which may be used in
conjunction with external control systems such as Audioaccess,
AMX, or Crestron. Your dealer can assist you in taking advantage
of these advanced features.
This RS-232 port may also be used to update the operating soft-
ware of the Nº360, so that your system will be able to handle new
digital audio formats as they are introduced. (Think of updating
the software in the Nº360 as being like installing new software in
your computer… only much less painful.) Once again, your dealer
can assist you in taking advantage of these advanced features,
should the need arise.
The “pinout” connections used on the RJ-11 connector used for
the RS-232 port is as follows: