Owner`s manual

This input conforms to the Sony/Philips Digital Interface Stan-

dard (S/PDIF), which calls for a 75Ω transmission of the DAS. Use a

digital interconnecting cable specifically designed for the 75Ω

PDIF standard, such as Madrigal MDC-2 cable, when using this in-

put.

7 EIAJ optical digital input (#6)

This input accepts digital audio signal (DAS) via optical cable

equipped with the

EIAJ optical connector (sometimes called

“Toslink

™

”) from digital sources such as a compact disc transport,

laser disc transport, digital audio tape transport, digital broadcast

receiver.

8 External IR Input

The Nº360 incorporates an infrared repeater input to facilitate a

wide range of installation options. If desired, the Nº360 may be

placed inside a cabinet or outside the normal line-of-sight in the

listening area, with the controlling IR signal being relayed to the

Nº360 by any of a number of commercially-available IR repeaters.

The specifications for this IR input call for a triggering voltage of

5 volts at no more than 100 milliamps of current, with the tip of

the

⁄8" mini-plug having positive polarity, as below:

IR input tip polarity

+–

5 volts @ less

than 100 mA

If you would like more information on the possibility of using an

infrared repeater with your Nº360, please contact your Mark

Levinson dealer.

9 Master communication port

This communications port allows the Nº360 to “link” to certain

compatible Mark Levinson components. (See “Linked Functions.” )