Owner`s manual

3 aes/ebu electrical digital inputs (#1 & #2)

These inputs accept the digital audio signal (DAS) via cables

equipped with XLR-type connectors from digital sources such as a

compact disc transport, DVD transport, laser disc transport, digi-

tal audio tape transport, or digital broadcast receiver.

These inputs conform to the AES/EBU digital interconnection stan-

dard, which calls for a 110Ω transmission of the DAS. Use a digital

interconnecting cable specifically designed for the 110Ω

AES/EBU standard, such as Madrigal MDC-1 cable, when using

these inputs. The pin assignments for the AES/EBU digital intercon-

nection standard are shown below.

PUSH

Pin 1: chassis ground

Pin 2: non-inverted digital

Pin 3: inverted digital

Connector ground lug: chassis ground

4 ST optical digital input (#3)

This input accepts the digital audio signal (DAS), via optical cable

equipped with the ST-type optical connector (sometimes called

“AT&T”) from digital sources such as a compact disc transport, la-

ser disc transport, digital audio tape transport, digital broadcast

receiver.

5 BNC S/PDIF electrical digital input (#4)

This input accepts the digital audio signal (DAS) via cables

equipped with BNC-type connectors from digital sources such as a

compact disc transport, laser disc transport, digital audio tape

transport, digital broadcast receiver.

This input conforms to the Sony/Philips Digital Interface Stan-

dard (S/PDIF), which calls for a 75Ω transmission of the DAS. Use a

digital interconnecting cable specifically designed for the 75Ω S/

PDIF standard, such as Madrigal MDC-2 cable, when using this in-

put.

6 RCA S/PDIF electrical digital input (#5)

This input accepts the digital audio signal (DAS) via cables

equipped with RCA-type connectors from digital sources such as a

compact disc transport, laser disc transport, digital audio tape

transport, digital broadcast receiver.