Owner`s manual

8 Teah IR

The Nº360 has both an infrared receiver and an infrared transmit-

ter in its main display, enabling it to respond to IR remote con-

trols that have “learned” the appropriate commands. The Nº360

can “teach” these commands to a learning remote control.

For more information on using the teach ir function of the Nº360,

see “Remote Control of the Nº360”

9 Standby & Standby LED

Pressing this button takes the Nº360 out of “standby” mode (pro-

vided the Nº360 is connected to AC power), making it fully opera-

tional.

Pressing

standby again places the Nº360 into standby mode,

which turns the display off, turns off all outputs (including the

record outputs), and disables the front-panel controls. The inter-

nal circuitry remains powered up in order to maintain its thermal

stability and optimum performance at all times.

While the Nº360 is in standby, the LED above the standby button

flashes approximately every five seconds. When the Nº360 is ready

to operate (that is, when it is not in standby mode), this LED re-

mains lit continuously.