Specifications

Specifications, PCD 3

■ Frequency response: 10 Hz – 20 kHz +0dB, -0.2dB

■ Total harmonic distortion (THD): 0.004% @ 1 kHz, 0dB

■ Dynamic range: 104dB (or better)

■ Signal-to-noise ratio: 107dB

■ Channel separation: 120dB

■ Intermodulation distortion (SMPTE IMD): 0.008%

■ Digital-to-analog conversion: Two precision 20-bit DACs

■ Filtering: 8x oversampling digital filter

Analog filter, linear phase to 40 kHz

■ Low-level linearity: Deviation unmeasurable to below -70dB,

approximately +1.0dB below -90dB

(undithered, ref 0dB @ 1kHz)

■ Output impedance: <1 Ω

■ Mains voltage: 120 V U.S. service

■ Mains frequency: 50/60 Hz

■ Power consumption: 25W @ 120V, 60 Hz

■ Shipping weight: 27 lbs/12.24 kg

■ Overall dimensions

■ Width: 8.4 in/214 mm

■ Height: 8.9 in/227 mm

■ Depth: 13.25 in/337 mm

Madrigal Audio Laboratories, Inc., reserves the right to change this

product’s features and specifications without notice.

Pin 1: Chassis ground

Pin 2: Signal + (non-inverted)

Pin 3: Signal – (inverted)

Pin assignments, male XLR

balanced analog output