Instructions / Assembly

Important safety instructions：
•
Please read carefully all instructions before assembly.
•
For your safety and ease
，
assembly by two or more adults is recommended.
•
Keep instructions for future use.
Pre-assembly：
•
Take out all parts and hardware from box.
Parts List
Item QTY
P1
Bench
1
P2
Legs
2
Hardware List
Item QTY
H1
Bolts
φ5/16*1"
12
H2
Lock Washers
φ5/16"
12
H3
Flat Washers
φ5/16"
12
H4
Allen Wrench
φ5/16"
1
DISCLAIMER:
Assembly Procedures:
ASSEMBLY INSTRUCTIONS
•
Do not discard any content until assembly completed to avoid accidentally discarding small parts or hardware.
Description
Description
Page 1 of 1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY.ALWAYS CHECK TO ENSURE
THAT ALL HARDWARE IS KEPT TIGHTENED.
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY
DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Step 1.Remove all the legs and hardwares from small box.
Step 2.Assemble the bench on a flat,soft surface such as carpet or cloth to prevent scratching. Using bolts (H1), lock washers
(H2), flat washers (H3), connect legs(P2) to bench (P1). Tighten bolts (H1) with allen wrench (H4).
Step 3. Place bench upright on a level surface.Assembly is complete.
Thank you for your purchase
H1
P2
Description: Heath Accent Bench