Instructions / Assembly

Page
1
of
1
ASSEMBLY INSTRUCTIONS
Description: Cody Accent Chair
Important safety instructions:
• Please read carefully all instructions before assembly.
• For your safety and ease, assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly:
• Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
• Take out all parts and hardware from box.
Parts List
Item
Description
QTY
P1
Front Legs
2
P2
Back Legs
2
P3
Chair
1
Hardware List
Item
Description
QTY
H1
Bolts
¢5/16*1"
12
H2
Lock Washers¢5/16"
12
H3
Flat Washers
¢5/16"
12
H4
Allen Wrench
¢3/16"
1
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES RESULTING
FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Step 1.Take out legs and hardwares from the parcel on the seat.
Step 2. Turn over the chair and lay on protective carpet
，
using bolts (H1), lock washers (H2), flat washers (H3), connect
legs(P1,P2) to chair (P3). Tighten bolts (H1) with Allen Wrench (H4).
Step 3.Place chair upright on a level surface. Assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE PERIODICALLY
INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL HARDWARE IS KEPT
TIGHTENED ・
Thank you for your purchase
*12
*1
*12
*12
P3
P1
P2
P1
P2