Product User Guide QuadTemp and OctTemp QuadTemp 4-Channel Thermocouple Based Temperature Data Logger OctTemp 8-Channel Thermocouple Based Temperature Data Logger To view the full MadgeTech product line, visit our website at www.madgetech.com.
Product User Guide Table of Contents QuadTemp and OctTemp Data Loggers Quick Start Steps ............................................ 1 Product Overview ........................................... 2 Additional Features & Operation .................. 3-4 Product Maintenance...................................... 5 Recalibration ................................................... 5 RMA Instructions.............................................. 5 General Specifications...................................
QuadTemp and OctTemp Quick Start Steps Product Operation 1. Insert the Software USB Stick in an open USB port. If the autorun does not appear, locate the drive on the computer and double click on Autorun.exe. Follow the instructions provided in the Wizard. Install the MadgeTech 4 Software and USB Drivers onto a Windows PC. 2. Launch the MadgeTech 4 Software. 3. The IFC200 interface comes with a USB cable.
Product User Guide Product Overview The QuadTemp is a four channel thermocouple temperature data logger with a reading rate of up to 4 Hz. It can measure and record data for up to 500,000 readings per channel. To maximize memory capacity, users can disable unused channels to add additional memory onto enabled channels. For easy identification, each channel can be named with up to a ten digit title.
QuadTemp and OctTemp Additional Features and Operation Wiring the Data Logger Wiring Options The QuadTemp has four SMP connections and the OctTemp has eight. These connections allow the user to insert subminiature thermocouple plugs into the connectors on the device. The diagram below shows how to connect the individual thermocouples for each of the devices. Warning: Note the polarity instructions. Do not attach wires to the wrong terminals.
Product User Guide Additional Features and Operation Continued Set Password To password protect the device so that others cannot start, stop or reset the device; 1. In the Connected Devices panel, click the device desired. 2. On the Device Tab, in the Information Group, click Properties. Or, right-click the device and select Properties in the context menu. 3. On the General Tab, click Set Password. 4. Enter and confirm the password in the box that appears, then select OK.
QuadTemp and OctTemp Product Maintenance Battery Replacement Materials: 3/32” HEX Driver (Allen Key) and Replacement Battery (U9VL-J) - Remove the cover from the device by unscrewing the two screws. - Remove the battery from its compartment and unsnap it from the connector. - Snap the new battery into the terminals and verify it is secure. - Replace the cover taking care not to pinch the wires. Screw the enclosure back together securely. Note: Be sure not to over tighten the screws or strip the threads.
Product User Guide QuadTemp General Specifications 4 Internal Channels Temperature Range Temperature Resolution Calibrated Accuracy -20 ºC to +60 ºC 0.05 ºC ±0.5 ºC (0 to +50 ºC) 4 Remote Channels Remote Channel Thermocouple Types Thermocouple Connection Cold Junction Compensation Maximum Thermocouple Resistance Female subminiature (SMP) Automatic, based on internal channel 1000 Ω, <100 Ω recommended Range (ºC) Resolution Accuracy J -210 to +760 0.1 ºC ±0.5 ºC K -270 to +1370 0.1 ºC ±0.
QuadTemp and OctTemp QuadTemp General Specifications Cont. Battery Life Data Format Time Accuracy Computer Interface Software Operating Environment Dimensions Material Weight Approvals 18 months typical Date and time stamped ºC, ºF, K, ºR, mV, V ±1 minute/month USB (Interface cable required); 115,200 baud XP SP3/Vista/Windows 7/Windows 8 (MadgeTech 4 only) -20 ºC to +60 ºC, 0 %RH to 95 %RH non-condensing 7.24 in x 2.7 in x 1.02 in (183 mm x 68 mm x 26 mm) Black anodized aluminum 15.
Product User Guide OctTemp General Specifications 8 Internal Channels Temperature Range Temperature Resolution Calibrated Accuracy -20 ºC to +60 ºC 0.05 ºC ±0.5 ºC (0 to +50 ºC) 8 Remote Channels Remote Channel Thermocouple Types Thermocouple Connection Cold Junction Compensation Maximum Thermocouple Resistance Female subminiature (SMP) Automatic, based on internal channel 1000Ω, <100Ω recommended Range (ºC) Resolution Accuracy J -210 to +760 0.1 ºC ±0.5 ºC K -270 to +1370 0.1 ºC ±0.
QuadTemp and OctTemp OctTemp General Specifications Cont. Battery Life Data Format Time Accuracy Computer Interface Software Operating Environment Dimensions Material Weight Approvals 18 months typical Date and time stamped ºC, ºF, K, ºR, mV, V ±1 minute/month USB (Interface cable required); 115,200 baud XP SP3/Vista/Windows 7/Windows 8 (MadgeTech 4 only) -20 ºC to +60 ºC, 0 %RH to 95%RH non-condensing 7.24 in x 2.7 in x 1.26 in (183 mm x 68 mm x 32 mm) Black anodized aluminum 17.
Troubleshooting Tips Why is the data logger not appearing in the software? If the QuadTemp or OctTemp doesn’t appear in the Connected Devices panel, or an error message is received while using either device, try the following: • Check that the IFC200 is properly connected. For more information, see Troubleshooting Interface Cable problems (below). • Ensure that the battery is not discharged. For best voltage accuracy, use a voltage meter connected to the battery of the device.
