Beverley Media Cabinet (MG-TB-832) ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect finish, assemble this item on a soft surface such as a cardboard or a carpet. Until all parts are in place, do not fully tighten all the bolts CARE INSTRUCTIONS Wipe only with a soft & dry cloth. To protect finish, avoid the use of chemicals and household cleaners, Any liquid spilled on the furniture should be cleaned up immediately with a damp cloth.
HARDWARE PROVIDED ! Allen Key Screw M8x110mm 4x PRODUCT PARTS A TABLE TOP D ALLEN KEY SCREW M8X50MM WASHER M8X3MM B 8x TABLE LEGS F ALLEN KEY 1X
STEP Turn the Table Top (A) upside down and align the Table Legs (B) on top of the holes in the Table Top as highlighted in red below.
STEP 2 Once aligned, begin to place the Washers (E) and Screws (C&D) on the legs. First place the Washers (E) and then add the Screws (C&D ) on top. Use Screw D on the narrow parts and Screw C on the broad parts of the Table Legs. For easier understanding, refer to the image below.
STEP Using the L-Key, (F) tighten all Screws and Washers to secure all four legs in place.
