(MG-TB-829) ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect finish, assemble this item on a soft surface such as a cardboard or a carpet. Until all parts are in place, do not fully tighten all the bolts. Note While assembling the product, first tighten the screws up to 50%. Once all parts are in place, only then fully tighten the screws! CARE INSTRUCTIONS Wipe only with a soft & dry cloth.
STEP Turn the Table Top (A) upside down and align tillable Legs (Blob top of the holes in the Table Top as highlighted in red below.
STEP Note While assembling the product, first tighten the screws up to 50%. Once all parts are in place, only then fully tighten the screws! Once aligned, begin to place Flat Washers (E) and Lock Washers (F) and Bolt (C&D) on the legs. First place the Washers (E) and then add the Bolts (C&D) on top.
STEP Using the L-Key, (G) tighten all Screws and Washers to secure all three legs in place.
