MINES MEDIA UNIT MG-TB-812 GR ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect finish, assemble this item on a soft surface such as a cardboard or a carpet. Until all parts are in place, do not fully tighten all the bolts. CARE INSTRUCTIONS Wipe only with a soft & dry cloth. To protect finish, avoid the use of chemicals and household cleaners. Any liquid spilled on the furniture should be cleaned up immediately with a damp cloth.
STEP Turn the Cabinet Base (A) upside down and insert the Right Metal Leg (B Right) into the base as shown in the image below.
STEP 3 Now, join the Left Metal Leg (B left) with the Center Metal Leg (C) and Cabinet Base (A) as shown in the image below.
STEP 4 To join the Cabinet Base (A) to the Metal Legs (B left and right), fasten Screws (F) and Washers Place them on top of each other. Lock washer (E) on top of Flat washer (D) and Screw (F) on top of Lock washer (E).
STEP O Using the L-Key, fasten screws on all highlighted places as shown below.
STEP Place the handle outside the door and re-attach using the screws that you just removed. Tighten using the L-Key (H).
