MH-TB-812 Ok, let’s get started! This is easy. You don’t have to be a DIY expert to assemble this product. Just follow our instructions and you will have a show-off worthy addition in no time.
what to do Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface for assembly. While assembling the product, tighten the bolts up to 50%. Once all parts in place, only then fully tighten the bolts. how to care Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately.
product parts what’s included (D)-Flat Washer (Ø20mmxØ8mm), 4x (E)-Lock Washer (Ø15mmxØ8mm), 4x A Cabinet Base (F)-Screw (M8X25mm), 4x B B Left Metal Leg Right Metal Leg C Center Metal Leg (G)-Screw (M6X10mm), 12x (H)-Allen Key (Ø4mmx110mm,), 1x (I)-Allen Key (Ø5mmx100mm), 1x 3
assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! step 1: A Turn the Cabinet Base (A) upside down and insert the Right Metal Leg (B Right) into the base as shown in this image. B A step 2: Next, insert the Center Metal Leg (C) into the Right Metal Leg B (Right).
step 3: A Now, join the Left Metal Leg B (left) with the Center Metal Leg (C) and Cabinet Base (A) as shown in this image. C B Left step 4: Next, see the areas highlighted in white to know where to tighten the screws.
step 5: To join the Cabinet Base (A) to the Metal Legs (B left and right), fasten Screws (F) and Washers (E&D) using Allen-key (I) . Place them on top of each other. Lock washer (E) on top of Flat washer (D) and Screw (F) on top of Lock washer (E). F E D I F step 6: Next, refer to the highlighted areas to see where to fasten the Screws.
step 7: Using the Allen-key (H), fasten screws on all highlighted places as shown in this image. G E D H G If the door does not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as shown in images.
Voila! Your media unit is now assembled and secure! 8
to err is human Drop-tested packing, double-checks, experienced craftspeople, high-end materialswe keep everything in mind to ensure your furniture arrives at your doorstep without any problems. But mistakes can sometimes happen because, well, to err is human. So, in the event of missing parts, delivery problems, damaged parts, please reach out to our team.
