MELODY ACCENT CHAIR (MG-CH-725) = . e ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect finish, assemble this item on a soft surface such as a cardboard or a carpet. Until all parts are in place, do not fully tighten all the bolts. CARE INSTRUCTIONS Wipe only with a soft & dry cloth, To protect finish, avoid the use of chemicals and household cleaners, Any liquid spilled on the furniture should be cleaned up immediately with a damp cloth.
STEP Turn the Chair Top upside down. Now fix the Chair Legs into the Chair Top as shown in the image below. Ensure to match all stickers when attaching Tighten the bolts using the L-Key (1) at all four places parts withdraw A, With B and so on. Securing the [_egg in p[ace‘ Next, see the red highlighted circles below to know where to tighten the Allen Bolts (G).
STEP 2 STEP 3 To fix the Center Rod to the Chair Legs, see the highlighted areas below to know where to tighten Screw (H). Using the L-Key tighten Screws on both ends of the Center Rod. Now to fix the Center Rod (D) to the Chair Legs, insert the Center Rod in the holes given on each Leg as highlighted in red above. Match stickers E with E and F with F as shown above.
