(MG-CH-711) ASSEMBLY INSTRUCTIONS Do not throw away the packaging material until the assembly is complete. To protect the product, assemble this item on a soft surface such as a cardboard or a carpet. While assembling the product, first tighten the screws up to 50%. Once all parts are in place, only then fully tighten the screws! CARE INSTRUCTIONS Wipe only with a soft & dry cloth.
PRODUCT PARTS HARDWARE PROVIDED A C CHAIR TOP TIERS a.
STEP 1 STEP 2 Note While assembling the product, first tighten the screws up to 50%. Once all parts are in place, only then fully tighten the screws! Using the Screw driver (D), tighten Screws (C) on all highlighted areas in red, as shown above, Turn the Chair top (A) upside down. Now place the Metal Legs (B) on top of it as shown in the image below.
