MH-BS-928 05 : 00 1 estimated assembly time people required 1
Ok, let’s get started! Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface. In the event of missing or damaged parts, delivery problems etc., please reach out to our team.
care guide Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately. Please! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
product parts A Backrest B Seat 4
what’s included (C) - Bolt x3 (D)- Washer x3 (E)- Allen Key x1 5
assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
step 1: Take the backrest (A) and align it with the predrilled slots on the seat taking this image as reference. B A step 2: Secure the backrest (A) to the seat using washers (D) and bolts (C). Tighten all three points using the allen-key (E).
This 360-swivel barstool comes with an adjustable backrest and height feature for ease of use. step 1: To adjust the backrest to a higher/ lower height, simply rotate the knob given on the back anti-clockwise to loosen it. Slide the backrest up/ down to your desired height and fix it in place by turning the knob clockwise.
step 2: To adjust the barstool seat to a higher height, rotate the seat anti-clockwise till the desired height is achieved. step 3: To adjust the barstool seat to a lower height, rotate the seat clockwise till the desired height is achieved.
