MH-BD-11506, 11510 30 : 00 2 or more estimated installation time people required 1
Ok, let’s get started! Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface for assembly. In the event of missing or damaged parts, delivery problems etc., please reach out to our team.
care guide Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately. Please! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
product parts I Headboard, Footboard x2 J Side Rail x2 K Mid Rail x1 L Mid Leg x3 4
M Slates x2 O Right Leg x2 N Left Leg x2 5
what’s included (A) - Bolt (8 x 50mm) x5 (B) - Bolt (8 x 25mm) x8 (C) - Washer (Ø8.5mm) x8 (D)-Lock Washer (Ø8.
(E) - Bolt (6 x 25mm) x8 (F) - Bolt (6 x 20mm) x4 (G)- Allen Key (5mm) x1 (H)- Allen Key (4mm) x1 7
assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
step 1: Attach (I) to the two side rails (J). I J J I step 2: To attach (I) to (J), insert washer (D), lock washer (C) and bolt (B) as shown in the image above. Tighten the bolt in place using allen key (G).
step 3: After attaching all corners, the product will look as shown in this image. step 4: Now, attach the left legs (N) and right legs (O) in their respective slots as shown in this image.
step 5: Using the image as reference, place the Bolts (E) or (F) and fix them in place with the help of allen Key (H). E H F step 6: After attaching all corners and legs, the product will look as shown in the image above.
step 7: Using the image as reference, place the bolt (A) and fix the mid-legs in place with the help of allen key (E). K L L L step 8: Attach the mid-rail (K) to the mid-legs (L) using bolts and allen Key, as shown in the image.
step 9: Make sure the slates are fixed in place.
