MH-BD-11500, 11501, 11509 30 : 00 2 or more estimated installation time people required 1
Ok, let’s get started! Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface for assembly. In the event of missing or damaged parts, delivery problems etc., please reach out to our team.
care guide Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately. Please! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
product parts F Headboard x1 F Footboard x1 G Side Rail x2 H Mid Rail x1 4
J Slates x2 I Mid Legs x3 5
what’s included (A) - Bolt (8 x 50mm) 5x (B) - Bolt (8 x 25mm) 8x (C) - Washer (Ø8.5mm) 8x (D)-Lock Washer (Ø8.
assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
step 1: Attach the headboard and footboard (F) to the two side rails (G). F G G F step 2: To attach (G) to (F), insert lock washer (D), washer (C), and bolt (B) as shown in this image.
step 3: After attaching all corners, the product will look as shown in this image. step 4: Now, place the mid-rail (H) in the centre as shown in this image.
step 5: Using the image as reference, place the bolt (A) and fix the mid-rail in place with the help of allen key (E). E A step 6: Next place the three mid-legs (I) to the mid-rail (H) as shown in this image.
step 7: Using the image as reference, place the bolt (A) and fix the mid-legs in place with the help of allen key (E). E A step 8: Place all the slates (J) parallel to each other as shown in this image. Make sure the slates are fixed in place.
Voila! Your bed is now assembled and secure! 13
