User's Manual

MadBullAirsoft.com
MAD BULL XG02 Ultimate Propane Adapter User Manual
NOTE: WEAR GOGGLE AT ALL TIMES!
There is a serious risk of personal injury, death, or property damage arising out of the use or misuse of this
product. By using this product, you agree to freely accept and full assume all such risks.
Smoothly turn Parts #6 (Rotating adapter) Clockwise to install the XG-02
adapter. Do NOT cross the adapter threads! If there is any leaking after
you install the XG-02, please take XG-02 out of propane immediately.
Leaking only happens when you didn’t install correctly. (* How to tell it is
leaking? You can hear the leaking sound and you can smell the propane
odd odor.) (** When you take off XG02 from Propane tank, remember to
hold tight of both XG02 and tank.)
Take off Parts #8 (Silicon oil adapter) and drop some silicon oil in
order to lubricate your GBB Airsoft. Then, put part #8 back to XG02.
(Propane gas is dry and doesn’t come with oil.)NOTE: * If there is
propane leaking when you take off #8 silicon oil adapter, please
uninstall XG02 immediately. You either don’t install XG02 correctly
or your XG-02 is not working functionally. ** When you put part#8
back to XG02, please remember the oring (parts #10) is still there.
( Important!!
A
pply vertical force onto tank only or the fill
stem will be broken.)
Once this is done, the adaptor should come off the rest of the way
with no trouble at all.
There is also a vent hole on the XG adapter which provides the same
function.
Apply some silicon oil onto on Parts #3 (internal stem) in order to make the
installation easily. There is an o-ring inside the head of propane tank. Make
sure the o-ring is not defective. If the o-ring is crushed, the internal stem
will have great friction during the installation.
During the installation, If you can NOT turn the XG02 all the way down to
the end, please make sure the Part#3 (internal stem) is tightly fixed onto
the XG02. If not, please use “No. 12 hexagon end cap wrench” to make it
tight.
If there is a leaking, please check the o-ring on propane tank and the
Part#3.
PRE-CAUTION
1. Do NOT use this adapter near open flame or other sources of
ignition.
2. Do NOT use this adapter indoor, To avoid leakage causing explosion.
3. This CHARGER is ONLY for Airsoft. Unauthorized modified will cause
damage.
4. Remove adapter before storing or to prevent accidental release of
propane.
5. Only use adaptor with “disposable propane cylinders” which have
passed the gauge test.
6. Do NOT use MAPP, Ethylene, CO2 or other gas. Only Propane. (Only
disposable propane cylinders.)
7. Do NOT use an incomplete or damaged adapter.
8. Assure that adapter is correctly installed without leaking before use.
Details：
Basic installation Adding silicon oil
Part#3 Internal Stem