User guide

Appendix A - Hostids for FLEXnet Licensing-Supported Platforms
Expected FLEXnet Licensing Hostids
102 FLEXnet Licensing End User Guide
DEC Alpha ethernet
address
netstat -i
080020005532
HP
(32-bit and 64-bit
platforms, non-
Itanium)
32-bit hostid uname -i and convert to hex,
or prepend with #
778DA450 or
#2005771344
HP
(64-bit
Itanium
machine
identification
getconf \
CS_PARTITION_
IDENT then prefix with
“ID_STRING=”
ID_STRING=9c766319-
db72-d411-af62-
0060b05e4c05
Mac OS X ethernet
address
/sbin/ifconfig eth0 and
remove colons from
ether
value
000A277EA17E
Linux ethernet
address
/sbin/ifconfig eth0 and
remove colons from HWaddr
00400516E525
SCO Hostid String uname -x (Serial is
SCO00354), then prefix with
“ID_STRING=”
ID_STRING=SCO00354
SGI 32-bit hostid /etc/sysinfo -s, convert to
hex, or prefix #
69064C3C or
#1762020412
SUN 32-bit hostid
hostid
170a3472
Windows ethernet
address
lmutil lmhostid
00B0A9DF9A32
Disk serial
number
DIR C: (look for “Volume
Serial Number is”, and remove
“-”)
DISK_SERIAL_NUM=
3e2e17fd
FLEXid
parallel or
USB port
dongle
lmhostid -flexid
FLEXID=7-b28520b9
FLEXids are made available by your vendor. Your vendor
can also provide you with an installer that installs drivers
for all FLEXids.
For parallel FLEXids, the parallel port must be configured
in bi-directional mode.
Hardware Platform Hostid Type this command on the
license server:
Example