User manual

15
6 ADJUST SETTINGS
This section describes the various setting
options of the DVD player.
[General Setup] [Audio Setup] [Video Setup]
[Preference Page] [Password Setup] [Exit
Setup]
1 Press SETUP button to display the setup
menu.
2 Use the navigation buttons
( / , / ) to
select item left, right, up or down.
3 Press ENTER to confirm your selection.
4 To exit the menu, press SETUP . You can
also move the cursor to the
position
then press ENTER button to exit.
General setup
[TV Display]
Select the screen format according to how
you want the picture to appear on the TV.
g[Normal/Ps] – for standard TV, a
full-height screen display with the sides
trimmed.
g[Normal/Lb] – for standard TV, a
‘wide-screen’ display with black bars on
the top and bottom.
g[Wide] – for wide –screen TV (frame ratio
16:9).
Note the TV Display item only can be
adjusted when pressing SETUP button in
DISC STOP mode or no disc in the unit.
[Angle Mark]
g[On] – When set on, the angle mark will
display on the screen if a disc
with angle information is playing.
g[Off] – When set off, the angle mark will
not appear on the screen.
[OSD language]
Select the default on-screen menu
language. Such as English.
[Captions]
You can set the captions On or Off. If you
set it On, when the captions will display on
the screen. When set off, the captions will
be hided.
[Screen saver]
Select Screen saver item to set on or off to
activate the screen saver or deactivate the
screen saver.
[Last Memory]
Select the Last Memory item to set on or off.
When set it On, the disc will resume the
play at the last position. If set it to Off, when
you stop the play and start play again, it will
play from the beginning.
Audio setup