User manual

10
Navigate through the menu
1 Point the remote control directly at the
remote sensor on this DVD player and
select the desired function.
g Point the remote control towards the
remote control signal receiver on the
player front face.
g Operation angle: About ±30 degree in
each the direction of the front of the
remote sensor.
2 Use the following buttons on the remote
control to navigate through the
on-screen menus.
Button Function
() / ( ) Move up or down.
( ) / ( ) Move left or right.
ENTER Confirm a selection.
0-9 numeric keys Enter numbers
Select menu display language
1
Press SETUP button on the remote
control.
The system setup menu is displayed.
2 Select the [OSD Lang], then press
( ) button.
5 PLAY
Play from disc
gDVDs and DVD players are designed with
regional restrictions. Ensure that the
DVD video you play is for the same
region zone as the player.
gThis DVD player can support play of the
following file formats: MP3/WMA/JPEG/
DIVX.
Play a disc
Caution
1 Slide the release switch button on the
side of the main unit to release the
monitor panel then pull it open to
display the disc compartment.
2 Place a disc with label facing up.
3 Close the monitor panel and start disc
play.
4 To stop disc play, press
button.
Tip
gIf the password entry menu is displayer,
you have to enter the password before it
can be played.
gIf you pause or stop a disc for about
several minutes, the screen saver
activates. To deactivate the screen
saver, press SETUP button and select
Screen saver item to set.
gNever place any objects other that
discs into the disc compartment.